My GreenDragon mk3 - Pics page 7

I have been a busy chap, tried on some mates borbets but the tires on the front are toooooooooo big













sorry about the imagesize
its a shame i forgot to clip the splitter up before i took the photos

that looks cool as f**k mate whats the next move then dude???

good to see her back on her feet m8 after the accident

nice,love the bonnet thats cool!

so it was u in skeggy, wernt sure if it was with the ratty bonnet, i was in the half sprayed mk3

thanks. I wasn't sure if that was you bros mk3 or not. I liked it better with the body on the side. I have a vr6 splitter coming soon. Tomorrow I hope. Then I need a rear black badge ad to be arsed to tint the othe window lol. I want to buy a wing and doors.

Been fixing all my "legal problems"
I had a bobby telling me all the things that are illegal about my car and he gave me advice. He informed me that the number plate is no longer £30 fine, but its 3 points and £60!!!!!!!!! Also Each piece of overly tinted glass is the same! He said to me, if i get stopped again to say the plates were on it when i got it lol! Overall a nice bloke tbh, He could have had me for 9 points all in all and made me walk home with £180 less lol! I also had a blub out that he didnt notice till i was leaving hahah!

So i have been busy! I changed my fuse (LMAO i didnt know that my carhad 2 fuses for left and right dip) and have been looking into legal pressed plates.

New tire needed still though

Replaced my fuel pump relay in hope of solving my cars hiccups, but i think that was down to spilsbys watered down petrol!

So tonight a quick oil change then time to get pissed in boston! anyone ever go to the axe? will be there for a wile tonight on a friends bday thing. so dont be shy and buy me a drink.

bit of the misses photography project, next shes hoping to do a vw project but this one was potraits. I cant wait for some dub ones.

sweet nice work there

UPDATE TIME:

Ratty bonnets going to come off for a wile so i can re rust it and put a much bigger rat on it and rust the middle bit better, Also doing something to my tailgate ( dont wanna reveal too much ) so they will go on at the same time.

New alloys are in the pipe line. After some 15-16's deep, thinking some Schmidt or ATS, maybe some porsche teledials if not. need to get down and out.

init man get that sh*t goin sounds good man

on hold for xmas, got lots to get on with that wont cost


Referbing my bbs, will upload some photos when i cba to get themoff the cam.

Cleaned out my Throttle body on saturday and it has seemed to fix my "irratic revs" and stalling problems. It was pretty filthy i would recommend anyone spending an hour of there time on this. Well worth it just becareful because it gave me reall nasty backache

the joys of working on a low car!!! caz's jetta did both of us in last week. my back is still tender!

Jon.

does me in just gettin in and out the polo....rite fuckin ballache tryin to stick 2 toddlers in thier child seats...hence the van

the joys of low cars.... they are a pain indeed, i cant even get the fucking jack under. i need to jack from the toeing eye at the back and tear the splitter off at the front

lol i use scissor jack to lift it a bit. have no choice lol. with the jetta we had to lift it via the wheel arch to get the jack under lol

Been a long time since my last update.

Made a bigger rat on the front so its easier to work out, some more stickers around the windscreen.
Fitted a new wheel cylinder. replaced my missing arch ( again )



Been referb'in some BBS for a wile but one are egg shaped Paradise blue




Bought a Gti grille and have started to rust the bottom of it and painted the slats blue too... Tried to take a photo but on my way down stairs with the camera it started pissing down

silver on the grille will be rusty soon

Are ya goin to be pickin other bits out in the blue?... or just the wheels?

rear badge probs. I dont know if im going to finish my wheels till i get one de-egged. new bonnets being made as we speak

How bad is the wheel? you can do em with a bit of heat and a bottle jack......... I know...lol.

lmao really, i might give it a bash! need to read into it first mind you

yeah.... and be gentle with the heat..

what do you suggest? Paint stripper heat gun? blowtorch?