Project Meth Rat

thanx for the comments guys
i still have a white box for the back of it i just dont use it (uses to much fuel) and is currently goin green in the garden LOL
I dont know how u remember that man but i seem to remember number plates for some reason

Slightly worried how there are no chicks in the back man?!

here you should have taken a hose to it first! all the best limo's have swimming pools!!!!

Jon.

its the numba plate thats always got me, wasnt till i saw the pics of when ya first got it that it sprung to mind.

its not watertight enough in the back to have a pool i have comtimplated gettin one though for shows would be a laugh

the plate is originally from boston so i think its been in lincs its whole life

I thoughti would put up a bit of an update and a few pics aswell.
I just had some nice shiny new coilovers delivered this week so hopefully gonna bash them on tomorrow morning and get the front slammed down, then order the lowerin blocks for the back once ive figured out what size i need. I have alse got new brake and clutch pedal rubbers cuz mine were very worn, just need to find the accelerator one now.


Went to lincoln for the weekend so decided to swap VWvase's wheels for mine with better tread on them. I think she looks sweet sat on the 14" Teardops. Time to see what 13s look like next Here is a pic of both cars.



Just a couple of the caddy in the snow



I will put a few pics up of the change over its gonna look awesome

wheel change looks good chimp, some thing simple like that can get your motivation going again!! good call

i wouldnt mind a set of those wheels they look really good on the caddy. Ive got a few things in the pipeline that im sorting out on the caddy but they take time and money. I cant wait for more daylight at night. can actually do some work on the car after work then

i am the same mate, need more daylight. but luckily for me, i am allowed to use my old double garage again soon..... so camper conversion coming up...

thats handy, would be helpful if i could get the caddy into my garage but there is a golf in the way and its full of sh*t lol

i'd love a garage

Coilovers are on now and im not to sure if its much lower than before as i forgot to measure before hand lol. Only one problem it doesnt seem to move now for some reason so when we get somt time and light were gonan take a look at it. Ive got some photos on my fone will get them up soon

Here are a few pics of the caddy how she sits now.
Unfortuneatley one of the CV joints decided to pop a ball so tom sorted us a new one and should hopefully be on by the weekend. Then i can see if i need to remove the helper springs or not to get her to sit how i want, then its order the lowering blocks for the back

Old Gmax -40mm


New EUtuning coilovers






Do you think its actually lower or not cuz i cant tell myself

i think u managed to fluke the exact same mate,looking at the pics!!maybe when its settled it will be lower?

still looks like that now man but the front end is rock solid and doesnt move an inch when you push on it lol

I think its the same cuz i was on rocco shocks

its definatly the same as it was chimp ...wounded for ya m8

actually managed to have a drive now the Cv joint is sorted, and she is actually a olil lower you can feel it when you drive her down the road. I will definatley feel it next weekend when I get the 2" blocks on the back end

take the coilies off mate and remove the 'helper' spring (the lower spring and its platform) , then just use the two platforms on the main spring, youll be able to get some more drop then

thats my next plan man just wanan get the blocks on the back first so i can set the correct height for the front. thanx for the advice though

the caddy is now lowered on the 2"blocks i will have some photos up sson as soon as i have them off my mates fone

sweet chimp man cant wait to see em

had to do a lil home arch rolling, so will get some pics of that when i jack it up next. Just gotta make sure its how i want it and so that it dont catch my tyres.
When i first put the blocks on went to drive down the road and all i could hear was it scraping so the hammer had to come out to sort it out. I am rather impressed with how it turned out. Will prob have to get a video so it can be appriciated properley

how u roll ya arches? just the hammer or the use of a scaffy bar....i find the scaffy bar useful m8

just a hammer with a flat and a round end. used the flat side to start to bend the metal then used the round end to shape. i will let you have a feel when she is at the next meet see what you think to the skills

lol chimp man as long as it clears ya tyres isnt noticable frm the otherside and u aint flaked the paint it will be fine....all mistakes i av made u mite aswell learn by em too lol